Dexamethasone/Prednisolone and Flunixin Metabolite Rapid Test Kit

Dexamethasone/Prednisolone and Flunixin Metabolite 

Rapid Test Kit

Glucocorticoids can promote the metabolism of three major nutrients and prevent protein synthesis. Hormone drugs are generally not recommended. They will cause different damage to the human body, especially to the organs native to hormones.

Experimental Preparation:

Restore the sample and kit to room temperature.

Operation steps:

1. Open the reagent barrel and take out the required number of micropores. Put the rest back into the reagent barrel and cover it well to avoid the reagent in the reagent barrel getting damp.

2. Mix the sample evenly and suck 200 μ L in micropores, blow and mix evenly for 5 ~ 10 times, and incubate at 40 ℃ for 3min.

3. Take out the required number of test strips, cover the reagent barrel cover, and then mark one end of the absorbent paper of the test strip.

4. Insert one end of the sample pad of the test strip into the micropore, react at 40 ℃ for 5min, interpret the results according to the schematic diagram, and the interpretation at other times is invalid.

Precautions:

1. Do not mix different batches of test strips and micropores.

2. It is recommended to wear clean disposable gloves for operation.

3. Retest the positive test results.

4. The reagent barrel shall be used up within 1 week after opening, and the unused reagent shall be stored at 2 ~ 8 ℃.

5. This product is only used for preliminary screening.

Provided Materials and Reagent：

1.Test strips: 12x8 strips (96 strips total)

2.Microwells: 12x8 wells (96 wells total)

3.Positive control: 1 (Dexamethasone: 0.2-0.3 ppb, Prednisolone: 6-8 ppb, Flunixin: 3-5 ppb)

4.Negative control: 1

5.Pipette tips: 100/kit

6.Pipette:1

7.Microwell holder: 1

Materials Required But Not Provided:

1.Micropipette

2.Timer

3.Incubator

4.Reader (optional)